Sony LANC camcorder with Video Light

The above example uses the PixController Universal board with the LANC PIC chip and the Video Light. This unit was constructed in less than 3 hours. Parts List:   1. PixController Universal with LANC PIC chip   2. Video Light   3. (2) Board Mounting kits (Part No. HWD001). Note: the board mounting kits spacers and bolts were cut down to fit the 0.65" space needed between the PIR sensor and PIR lens.   4. External switch (Part No. SWT001)   5. Pelican 1300 case from www.case4less.com   6. 12V Gel Cell, which powers the Video Light II and PixController Universal boards.   7. Glass for the camcorder lens and for the Video Light. These can be purchased from your local hardware store and glued down using Marine GOOP. You need two separate pieces of glass.