|
Camcorder purchased separately
All PixController
products are designed and manufactured in the USA!
|
Film wildlife documentaries with multiple video cameras |
Video your hunt from different angles never before possible |
|
The
Remote VideoEye™ will revolutionize the way you video your next hunt or film your wildlife
documentary. This will be the “must have” tool for any
video film crew.
With the press of a button
from a wireless hand held remote hung around your neck you
can control multiple video cameras from a distance up to 180
feet. Film your own hunt from angles never before possible
or too dangerous to film. Capture multiple angles at the
same time giving your video that cutting edge needed today.
Remote VideoEye™ Ground Setup
What’s included with your
Remote VideoEye™:
-
Remote
VideoEye™
Controller Box
-
Removable Tilt-Swivel
RF Antenna
-
LANC camcorder cable
-
SlimFire hand held
remote control
-
Remote VideoEye™
manual
 |
|
Introduction
The PixController Remote VideoEye™ is a wireless remote control
device which can control any Sony or Canon camcorders with the LANC
editing port. The Remote VideoEye™ consists of a small waterproof
box, RF wireless receiver unit, and LANC port for connecting your
user supplied camcorder. A handheld remote control unit is
included to control the Remote VideoEye™ from a wireless distance up to 180
feet. The unit is powered by 4 AA batteries which will last all
season long.
With the single press of the "On" button with the included SlimFire
remote control a wireless command to power on your camcorder and start
it recording is sent. With the press of the "Off" button a commands to
stop the camcorder recording and power it down is sent. Buttons for controlling the camcorder zoom
functions are also present.
The Remote VideoEye™ is the perfect for tool for capturing video
without needing another camera man. Filming wildlife documentaries
or hunting videos will now take on a whole new and exciting look.
You can now film “never before seen” angles of your hunt or
wildlife documentary. Imagine a video camera setup from ground
filming the shot from a tree stand all controlled from the hunter or
camera man in the tree stand.
There is no limit to the number of Remote VideoEye™ camcorder unit
that can be used at one time. Several system can be setup at one
time and will all set to record with a simple press of the button
with the remote control unit. Remote VideoEye™
can also be triggered via the X10 wireless PIR motion sensor.
Imaging capturing footage of a trophy buck walking into your setup
from angle never before possible. Adding this type of footage to
your hunting video or wildlife documentary will set you apart from
others.
Remote VideoEye™ units are also addressable, which means you can
control several Remote VideoEye™ camcorders units independently from
one another in a single setup. There are endless setups and endless
filming angles you will be able to setup on your next video
creation.
|
 |
Purchase
Remote VideoEye™ System
Part Number: RVI001
Description:
Includes the
Remote VideoEye™ controller box, LANC cable, and SlimFire hand
held remote control unit.
Price: $239.95
|
|
|
 |
Purchase
Spare SlimFire Remote Control Unit
Part Number: X10002
Description:
Hand held remote control unit for the
Remote VideoEye™. Note, this is included in the purchase of the
Remote VideoEye™ unit.
Price: $14.95
|
 |
X10 Wireless PIR
Motion Sensor
Part Number:
X10001
Description:
X10 Model MS14A Indoor/Outdoor PIR wireless motion sensor.
This is used in conjunction with the PixController Remote VideoEye
controller. Requires 2 AAA batteries.
Price: $14.95
|
|
