Direct RSS PixController (Refresh-Shutter-Slave)

     Discontinued Product



Kit Includes
Direct PIR Digital Camera Control Board. (6 month Warranty)
Camera Mounting Cable with Board Connector.
Cable to connect an External Light Source (IR LED's, or Flood Light).
Battery Power Supply Cable with Board Connector.
1" PIR Lens with a Focal Length of 0.65".
Free Download of Visual Media Explorer, a $24.95 value.
     New GPS Support!

The Direct RSS PixController is a complete electronic kit to construct a Wildlife Trail Camera System, or Remote Camera Security System.

The Direct RSS PixController uses a Passive Infrared (PIR) sensor which detects body heat and motion to trigger the camera system.  The built in day/night sensor lets you control taking photos in the day, night, or 24 hours.

The Direct RSS PixController controls the "Refresh" and "Shutter" controls of your Digital/35 mm camera.  These controls are hardwired to the board.  There is also a port to control any "Slave" external light (either a Flood light, or IR LED Array).

The User Switch Settings let you adjust the delay between photos, fast and normal shutter modes, day/night operation, taking digital stills, movies or double photo mode, and setup the Walk-Test PIR mode.

Attach "hardwired" Camera Devices such as the Olympus D-370 or D-380 Digital Cameras, or the Canon Owl PF 35 MM Camera, and many more! 

With a recommended 4 C Cell battery supply you will get approximately 8+ months of continuous use. 

Purchase NiMH Rechargeable Batteries Here


Note: The camera device must be modified in order to work with this board. 

All PixController board are built and tested before being shipped, and include a 6 month warranty.  Click here for warranty information.

Helpful Documents
Direct RSS Board Installation Instruction
Direct RSS User DIP Switch Settings
Direct RSS (Super Fast Shutter Mode) "3 shutter speeds"

How to modify the Sony DSC-P41 Digital Camera NEW!!
How to modify the Sony DSC-P32 Digital Camera NEW!!
How to modify the Sony DSC-U20/U30 Digital Camera NEW!!
How to modify the Minolta X20 Digital Camera NEW!!
Sony DSC-P32/U20/U30 & Minolta X20 User DIP Switch Settings
NEW!

How to modify the Olympus D-370 and D-380
How to modify the Olympus D-370/380 (on/off style)
How to modify the Olympus D-520
How to modify the Canon Owl PF and BF 35 mm
How to modify the Olympus Infinity Jr. 35 mm Camera
How to modify the Samsung Maxima 33s 35 mm Camera

How to modify/Add an IR LED Array or Flood Light

How to add an External Digital Camera Power Connector/Supply

Advanced Features
Integrated PIR with a range of over 100 feet.
Fast Shutter Mode (for Olympus Digital Cameras D-370/D-380) - Takes a photo in 1 second or less!
Add a Flood Light or IR LED Array.
Movie, Digital Still, or Double Photo Camera Capture Modes.
Low Power Mode of Operation - Extended Battery Life.
Low Battery LED Indicator - Shuts PIR Controller down to prevent False Photos.
8 Delays - Adjust delay periods from 10 Seconds to 1 Hour between taking photos from PIR events.
Day/Night/24 Hour Modes of Operation.
Walk-Test PIR Mode.




Back Mounted User Controls - the "User DIP Switch" and "PIR Sensitivity POT" can be mounted on the back side of the board.  Ask for this option when filling out your order form if this is needed for your system.



 

 

Board Hardware Mounting Information
Dimensions: 1.5" X 4.6"
Board Mounting Holes: 4 - #6-32 Holes
Click here for Board Drawing

Board Component Layout Diagram




Direct  RSS PixController kit includes the Control Board, 
Camera Cable with board connector, 
External Light cable with board connector,
Board Power cable with board connector, 
and PIR Lens.

Completed Unit Examples


Olympus D-380 Digital Camera Example (open case)
Shown using the Pelican 1060 case

Canon Owl PF 35mm Camera Example


Olympus D-380 Digital Camera Example (closed case)
Shown using the Pelican 1060 case



Olympus D-520 Digital Camera Example



Home Products Buy Now Contact Us Links

Copyright 2003, PixController, All Rights Reserved.
http://www.PixController.com