Phone: 724-733-0970  FAX: 724-733-0860 M-F 9AM-5PM EST


 Raptor Wireless Cameras
Raptor Cellular Camera
Raptor Wi-Fi Camera
Raptor Accessories
Raptor Live Photos
 Covert Surveillance Systems
UndercoverEye MDVR
UndercoverEye Raptor Cellular
UndercoverEye Power Box
 Wireless Sensor
PIR Motion Sensor
NO/NC Switch Sensor
Magnetic Switch Sensor
Pressure Mat Sensor
Vibration Sensor
Wireless Sensor Accessories
Batteries & Solar Panels
Media Storage Cards
Camera Locks & Enclosures
Video Cameras & IR Arrays
Antennas & Routers



Product Specifications
Copyright ©, PixController Inc., all rights reserved.

Overview | Specs | DVREye Wireless PIR Model | Locking/Mounting | Movie Examples


DVREye™ Exterior Components

DVREye™ Interior Components

DVREye™ Controller Board

Unit Specs:

  • Size: 9-1/4"L x 7-3/4"W x 4-1/2"D

  • Camera: 1/3” Sony EXview HAD CCD video camera: NTSC or PAL

  • Media Type: CompactFlash (CF) or Sony Memory Stick PRO

  • PIR Motion Detection Range: 80+ Feet (heat and motion trigger) with adjustable sensitivity.

  • IR Flash Range: 70 Feet

  • Enclosure: rugged and waterproof case

  • Trigger Time:~4-6 seconds

  • 12V Battery: 3.4AH 12V SLA Rechargeable/Removable battery with A/C charger (included) - Lasting approx. 3 weeks on a single charge.

  • 12V Solar Panel/AC Charging port with over charging protection and blocking diode. Standard 2.1mm center positive connector.

  • User adjustable Settings

  • Unit lockable with a Masterlock® Python™ Cable

  • Temperature range: 0ºF to 120ºF

  • Power up auto walk-test mode (testing out PIR unit detection area/range)

Operation Spec:

  • On board Power On/Off switch

  • 10-position DIP switch for setting unit operations

  • 8 PIR delay settings: no delay, 30 seconds, 1 minute, 2 minute, 5 minute, 10 minute, 15 minute, 20 minute

  • 24 hour, day only, night only operation

  • Recording Times: 30 seconds or Continuous motion recording, 30 seconds only, 1 minute, 5 minute

  • Special setting to power camera/DVR on for TV DVR setup/review

  • Dual LED - Red Control LED/Green PIR LED (adjustments to turn LED's on/off)

  • Day/Night Sensor for setting operation modes

  • On board MIC and MIC Gain POT to adjust input sound levels

  • On board PIR sensitivity POT to adjust motion detection range/sensitivity

  • On board IR Remote Tx control LED - Allows a wide range of DVR devices to be controlled

  • Upgradeable board firmware: Allows custom programming options/device control options 

  • External Trigger Port: Custom port to allow other sensors to trigger the DVR other than the on-board PIR sensor.

  • Adjustable DVR recording quality from 640 X 480 @ 30 frames/second down to 320 X 200.

    Video Camera Specs:

  • Switches from color to night IR automatically

  • Day Color- Night IR 6mm Video Camera

  • System: 1/3” Sony EXview HAD CCD video camera: NTSC or PAL

  • Resolution: 520 TV Lines

  • Input Voltage: 12V DC

  • Lens: S= 6.0mm, W= 3.6mm

  • Minimum Illumination: 0.05 Lux, 0 Lux(IR ON)

  • Synchronization: Internal

  • Adopts "Special Optical Low Pass Filter" No Day & Night Focus Shift

  • High Efficiency Infrared LED, Radiant IR Distance - 70 Feet

  • CDS Automatically Activate LED, When Light Drops Below 20 Lux

  • High Sensitivity Sensor, Excellent Picture Quality

DVR Specs:

Video Encoding
-ISO Standard MPEG4 SP encoding
with AAC-LC audio.
-MPEG4+AMR Audio for 3GP settings.

Audio Encoding
-all modes=128kbps AAC
except AMR for 3GP settings

Video Decoder
-MPEG-4 SP with MPEG-1 Layer 3 (MP3) audio,30fps up to D1 resolution
-DivX 3.11@ CIF Resolution; DivX 4.x,5.x,30fps up to D1 resolution
-Quicktime 6; MPEG-4 AAC-LC stereo, MP4 format at up to D1 resolution
-3GP (MPEG4+AMR) 15fps at 320x240 or 176x144 resolution

File Formats

Audio Decoder
G.726 - AMR - MP3(30-320kbps CBR/VBR)- WMA

5 programmable recording schedules(once,daily,weekly or monthly)
Transfer files between cards
Background music for slideshow
One-click record feature from remote
Downloadable firmware upgrades

Dimensions and Weight
4.6 inches x 3.42 x .71 inches. 4.9 oz.

Storage Card Slots
-CF and MMC/SD/MS Duo

Storage Card Compatibility:
Sony MS Duo (tested up to 128MB)
Sony MS Pro Duo (tested up to 2GB)
SanDisk MS Pro Duo (tested up to 1GB)

Type I and Type II
Hitachi Microdrives with CF type II interface (tested up to 6GB)
IBM 1GB Microdrive
SanDisk CF (tested up to 1GB)
Protec CF 256MB
Pretect CF 128MB
Hagwara sys_com CF 512MB
Kingston CF 512MB

DVR Recording times based on a 1Gb memory card:

You can adjust the recording size and recording quality of your Neuros DVR unit by connecting the DVR unit to a TV or monitor.





Super Fine

320 x 200

250 Minutes

143 Minutes



368 x 208

250 Minutes

143 Minutes



640 X 440

250 Minutes

143 Minutes

111 Minutes

60 Minutes

Notes on memory cards (CF cards and Memory Stick DUO cards):
If you are not getting any recordings on your CF or Memory Stick DUO card please be sure that the memory card is properly formatted. This can be done from the Neuros DVR unit via the Remote Control and connecting it to your TV. Please be sure that the memory card is compatible with the Neuros DVR. For a list of compatible memory cards please see the Neuros web site,

Notes on setting the DVR Time & Date:
To set the time & date on the Neuros DVR unit connect the DVR to your TV and use Neuros DVR Remote Control to set the date. Please see the Neuros DVR manual for more information. There is no battery back up inside the Neuros DVR, however, if you connect the DVR unit to your DVREye and power the DVREye up it will keep the date. You have about 4 – 6 hours after setting the date/time to install and power the DVREye before loosing the time/date on the DVR. The time/date will not be superimposed on top of the recorded video. To see the time/date that your video clips were taken you will need to install your CF card into a PC or PVP and read the file time/date.


PixController, Inc. products are designed, engineered, and manufactured in the USA

Copyright ©, PixController, All Rights Reserved.

Remote Outdoor Surveillance & Wildlife Camera Systems
Phone: 724-733-0970   Fax: 724-733-0860   Email: